K-Tec

Colour DBK Camera Settings

  • michaeloconnell
  • Topic Author
  • Offline
  • Administrator
  • Administrator
More
8 years 11 months ago #103724 by michaeloconnell
Colour DBK Camera Settings was created by michaeloconnell
Just wondering if anyone here uses the colour DBK Imaging Source cameras?
If so, what colour settings do you use when recording?
Michael.

Please Log in or Create an account to join the conversation.

More
8 years 11 months ago #103757 by jmckeon
Replied by jmckeon on topic Colour DBK Camera Settings
Hi Michael, I have one of those for over a year now.
I take it your using IC capture?
I tend to capture using uncompressed rgb24 for colour or Y800 for greyscale.

Please Log in or Create an account to join the conversation.

  • michaeloconnell
  • Topic Author
  • Offline
  • Administrator
  • Administrator
More
8 years 11 months ago - 8 years 11 months ago #103764 by michaeloconnell
Replied by michaeloconnell on topic Colour DBK Camera Settings
Thanks John.
Yea, I'm using IC Capture.
I took one video the other night in Y800 and noticed afterwards that it was mono, so I note your suggestion re RGB24.
In terms of the sliders to configure the colour, do you have any preset values you use to have a 'standard' colour for each imaging run?
Last edit: 8 years 11 months ago by michaeloconnell.

Please Log in or Create an account to join the conversation.

More
8 years 11 months ago #103765 by jmckeon
Replied by jmckeon on topic Colour DBK Camera Settings
I haven't got any handy. If you use the 'one push' button it will tend to automatically find a good white balance based on the target on screen. This only seems to work properly when the target is large on the sensor though. When the target is small it fails badly. I tend to set it manually judging by eye if I can. I'll take a note of it next time.
The following user(s) said Thank You: michaeloconnell

Please Log in or Create an account to join the conversation.

Time to create page: 0.108 seconds
Powered by Kunena Forum