K-Tec

New LX90

  • bertthebudgie
  • Topic Author
  • Offline
  • Main Sequence
  • Main Sequence
More
18 years 4 months ago #21707 by bertthebudgie
New LX90 was created by bertthebudgie
So finally bitten the bullet and gone a bought myself a scope. Was almost to scared to take it out of the box last night in case I breathed on it by accident but eventually after about 2 1/2 hours got it set up in the spare bed room looking out the window. Now I know what its like to be the rear gunner on the Millenium Falcon!!!!

But it is a thing of beauty and I am almost a bit daunted by all the things it can do.

But my question is there is just a single silver white washer that Im not sure where it goes. I suspect it is to do with the rod that holds the telescope to the tripod but it is not shown in the diagram supplied. There are a a couple of Hex nuts there that are only used with an lx200 and are seemingly surplus. I suspect that this washer is also surplus but it is not clear from the manual. Any lx90 users know the definate answer?

Thanks

Eqipment
Lx90 8' SCT, UHC Narrowband filter
SPC900 Webcam, Atik 16ic
Astrozap Dew Heater
Meade eyepieces & barlows 9,26 and 32mm
Moonfish 32mm 2"
_______________________________________

"Always pass to the man in space"

Please Log in or Create an account to join the conversation.

More
18 years 4 months ago #21721 by eoghang
Replied by eoghang on topic Re: New LX90
Congrats on the new LX90, hope you have as much fun with it as I've had with mine :)

If memory serves, there's a C-shaped clip/washer that retains the threaded rod within the tripod head assembly. This is attached to the upper part of the threaded rod to stop it slipping out of the tripod head when you unmount the scope. I'm guessing this this is your spare part.

BTW I forgot to mention before that there's a very active LX90 on Yahoo! ( groups.yahoo.com/group/LX90 ). I found this to be a great resource for newbie questions.

Cheers,
Eoghan

Please Log in or Create an account to join the conversation.

  • bertthebudgie
  • Topic Author
  • Offline
  • Main Sequence
  • Main Sequence
More
18 years 4 months ago #21722 by bertthebudgie
Replied by bertthebudgie on topic Re: New LX90
Thanks eoghan

I already have the c clip in place but this seems to be an additional silver metal washer im thinking is surplus and not needed. ill try the yahoo site also.

Eqipment
Lx90 8' SCT, UHC Narrowband filter
SPC900 Webcam, Atik 16ic
Astrozap Dew Heater
Meade eyepieces & barlows 9,26 and 32mm
Moonfish 32mm 2"
_______________________________________

"Always pass to the man in space"

Please Log in or Create an account to join the conversation.

More
18 years 4 months ago #21727 by michaeloconnell
Replied by michaeloconnell on topic Re: New LX90
David,
Congrats! I have an LX90 and can vouch that it's a great scope!
i thnk the LX90 yahoo group might be the best port of call as it's a couple of years since I bought mine and a few brain cells have died in the interim!

Please Log in or Create an account to join the conversation.

More
18 years 4 months ago #21744 by Keith g
Replied by Keith g on topic Re:
David - may you have many hours of viewing pleasure :D

Mind if I ask - Where did you buy it from?, Did shipping cost much?
Thanks,
Keith..

Please Log in or Create an account to join the conversation.

More
18 years 4 months ago #21752 by Seanie_Morris
Replied by Seanie_Morris on topic Re: New LX90

it's a couple of years since I bought mine and a few brain cells have died in the interim!


...a few???

:lol: :lol: :lol:

Midlands Astronomy Club.
Radio Presenter (Midlands 103), Space Enthusiast, Astronomy Outreach Co-ordinator.
Former IFAS Chairperson and Secretary.

Please Log in or Create an account to join the conversation.

Time to create page: 0.107 seconds
Powered by Kunena Forum