K-Tec

How to: Canon 350D T-mounted onto SkyWatcher 12" Dob

  • Seanie_Morris
  • Topic Author
  • Offline
  • Administrator
  • Administrator
More
4 years 8 months ago #108190 by Seanie_Morris
I found out tonight for the first time in a long time (I forgot!), that I can't get prime focus through my Canon 350D with it T-Mounted onto my SkyWatcher 300mm (12 inch) Dob. No matter what combination of threaded rings on the Crayford focuser, it just wouldn't get to prime focus. Anyone have experience and a solution to this?

Seanie.

Midlands Astronomy Club.
Radio Presenter (Midlands 103), Space Enthusiast, Astronomy Outreach Co-ordinator.
Former IFAS Chairperson and Secretary.

Please Log in or Create an account to join the conversation.

More
4 years 8 months ago #108194 by michael_murphy
Replied by michael_murphy on topic How to: Canon 350D T-mounted onto SkyWatcher 12" Dob
Hi Seanie,

You might not have enough 'in focus' (if that's the word) i.e. the camera is not close enough to prime focus even when the focuser is racked all the way in.

Michael.

Please Log in or Create an account to join the conversation.

  • Seanie_Morris
  • Topic Author
  • Offline
  • Administrator
  • Administrator
More
4 years 8 months ago #108216 by Seanie_Morris
Replied by Seanie_Morris on topic How to: Canon 350D T-mounted onto SkyWatcher 12" Dob
That's it alright Michael. I thought of even sawing the end of the barrel enough to get it in, but I'd have to shave the outside of the upper half of the barrel of the T-adapter. That's all I can think of to make it fit!

Seanie.

Midlands Astronomy Club.
Radio Presenter (Midlands 103), Space Enthusiast, Astronomy Outreach Co-ordinator.
Former IFAS Chairperson and Secretary.

Please Log in or Create an account to join the conversation.

More
4 years 8 months ago - 4 years 8 months ago #108256 by JohnMurphy
I had the same problem with my 8" newt years ago, I ended up replacing the focuser with a low profile job.
This is an example of what you'll need  www.firstlightoptics.com/skywatcher-focu...rayford-focuser.html  
Usually comes with an extension tube so you can still use it visually.

Clear Skies,
John Murphy
Irish Astronomical Society
Check out My Photos
Last edit: 4 years 8 months ago by JohnMurphy.
The following user(s) said Thank You: Seanie_Morris, Until_then-Goodnight!

Please Log in or Create an account to join the conversation.

  • Seanie_Morris
  • Topic Author
  • Offline
  • Administrator
  • Administrator
More
4 years 7 months ago #108275 by Seanie_Morris
Replied by Seanie_Morris on topic How to: Canon 350D T-mounted onto SkyWatcher 12" Dob
Thanks John, I'll check that out. That one pretty much looks like mine, only it's shallower when reeled all the way in. Why it wasn't standard to begin with, I don't know.

:)

Midlands Astronomy Club.
Radio Presenter (Midlands 103), Space Enthusiast, Astronomy Outreach Co-ordinator.
Former IFAS Chairperson and Secretary.

Please Log in or Create an account to join the conversation.

More
4 years 7 months ago #108276 by JohnMurphy
I think they tend to use standard/cheaper focusers on most dobs/newtonians and these are really only suitable for visual use, they will not back focus enough to bring a focused image onto a camera sensor. The good thing about replacing the focuser with one suitable for photography is that you will (usually) spend an extra few quid on fine tuning focusing e.g. 10:1 or better, and this helps quite a bit both in visual and photo use. 

Clear Skies,
John Murphy
Irish Astronomical Society
Check out My Photos
The following user(s) said Thank You: Seanie_Morris, Until_then-Goodnight!

Please Log in or Create an account to join the conversation.

Time to create page: 0.119 seconds
Powered by Kunena Forum